老王兄:
再試試看,應該會成功!
(此東東校正步驟和SUUNTO錶幾乎相同,每次我校正皆OK)
CALIBRATING THE COMPASS
The compass of the Summit and Altitech2 must be calibrated on a regular basis(為維持準確必需時常校正,換電池後一定要校正). The compass should be calibrated any time it does not seem to be working properly. We recommend calibrating the compass prior to any activity where optimal accuracy is desired, such as a long back country trip. The watch must also be calibrated to your local altitude prior to your initial use.
1.Start in COMPASS mode.
2.PRESS & HOLD the S4 key(長按S4鈕進入校正狀態) to enter the calibration sequence.
3.CAL will appear in the center line of the display.(CAL會出現於錶中)
4.Rotate the unit clockwise for two complete rotations of approximately 15-seconds per rotation. (順時鐘方向以每圈15秒的速度轉錶身兩圈)
5.To exit the calibration sequence at this point using the S1 key. Or advance to setting the magnetic declination using the S4 key.
NOTE: For the optimum accuracy, the compass must be held completely level during the calibration process. We recommend placing the unit on top of a drinking glass while performing the calibration as this will make it easier to keep the compass level.(校正轉圈時錶身必需保持水平,建議將手錶置於玻璃杯上轉圈)
6.If the calibration is successful the display will show CAL in the center line and END in the upper line and automatically advance to the compass display.(若校正成功則會顯示CAL及END)
7.If the calibration was unsuccessful an ERR message will appear in the upper line of the display and you will need to repeat the calibration sequence. (若校正不成功則會顯示ERR)
8.If you have chosen to set a magnetic declination, adjust the degrees and direction using the S1 and S2 keys. Set and advance from variable to variable using a the S3 key.
9.If you do not know the magnetic declination for your area, leave this setting at ZERO.
10.When you have completely entered the magnetic declination you desire, exit the calibration sequence using the S4 key.
請教:hhliao 兄,
您購買的 High Gear Altitech 2
能否介紹一下,如產地、功能、價格、....!
TKS